r15.0.3: Changelog

 

Improvements

 

Notch properties no longer reordered - Imported Notch properties now retain their original ordering and do not get reordered alphabetically by disguise

Better handling of user accounts containing non-ASCII characters - Windows user accounts containing non-ASCII characters can result in a failure to launch a project or a failure to create a diagnostic

 

Fixes 

Sockpuppet/Notch - Exported MA personality of default d3-notch layer is not working

 

[DMX Lights] DMX Lights parent/child hierarchy not retained after project restart

[GUI] Media Ingestion History widget opens but does not populate contents

[Visualiser] Projector shadows not rendered correctly across surfaces when moved via OpenModule or ScreenPositionModule

Current known issues

VR

- VR entails on additional render overhead

- This may result in a poor performance

 

Upgrading 32-bit to 64-bit Sockpuppet shows

- There may be issues upgrading Sockpupper projects from 32-bit to 64-bit in 14.4.x builds. If your project falls into this category, please contact support@disguise.one who can arrange a project upgrade for you.

 

Permissions error after installing

- On a small number of machines, a python-based permissions error will prevent software from starting.

- This issue can be solved by restarting Windows

 

Potential UI performance regression with long and busy timelines

- With either long or busy timelines containing e.g. a plethora of notes/cues, the UI may suffer a degradation in performance

- Minimising the timeline negates this

 

Slideshows transition time

- The transition time between slides in slideshows is currently broken

- The fix for this makes fundamental changes to timeline operations, so will take a while to work its way into future releases

 

A more comprehensive and detailed changelog will be issued for r15 in the coming days.

Please contact support@disguise.one for feedback and issues.

r15.0.2: Fixes

r15.0.2: Changelog

 

Fixes 
  • Project launch - Incorrect querying of DirectX results in failure to launch designer software on some Windows 7 machines

 

  • Content Management - More rigid importation mechanism, can mean failure to ingest media correctly

 

  • Visualiser - Illuminance values are too low

 

[Automation / Encoders] Default d3 automation axis reference is missing

[Content Management] Content with proxies used on undersized surfaces will output proxies instead of full content

[Device Control] MIDI Show Control (MSC) using a usb device not properly accepted

[Device Recording] Second takes of device recordings from the same device are unable to affect the same parameters of the first, overwritten recording

[Modules] Camera pivot & rotation in AnimateCamera not functioning

[OptiCal Camera] Viewing recalibration results incorrectly contains older calibration data

[OptiCal Camera] OmniCal Warps During Capture UI poorly aligned

[Stage] Project specific screen configuration showing as 'Inactive' until navigation commenced

Current known issues

VR

- VR entails on additional render overhead

- This may result in a poor performance

 

Upgrading 32-bit to 64-bit Sockpuppet shows

- There may be issues upgrading Sockpupper projects from 32-bit to 64-bit in 14.4.x builds. If your project falls into this category, please contact support@disguise.one who can arrange a project upgrade for you.

 

Permissions error after installing

- On a small number of machines, a python-based permissions error will prevent software from starting.

- This issue can be solved by restarting Windows

 

Potential UI performance regression with long and busy timelines

- With either long or busy timelines containing e.g. a plethora of notes/cues, the UI may suffer a degradation in performance

- Minimising the timeline negates this

 

Slideshows transition time

- The transition time between slides in slideshows is currently broken

- The fix for this makes fundamental changes to timeline operations, so will take a while to work its way into future releases

 

A more comprehensive and detailed changelog will be issued for r15 in the coming days.

Please contact support@disguise.one for feedback and issues.

 

r15.0.1: Improvements and fixes
Improvements 
  • Device Recording -  General UI improvements for Device Recording
Fixes 
  • Content Mapping - Spherical mapping applied to a surface results in a white screen

 

[Automation / Encoders] Restore behaviour of PSN frames sent across multiple frames

[Device Recording] Playback of a device recording moved to a new position in the timeline plays back from the beginning of the timeline and not the newer position

[Device Recording] Slight performance hit when scrubbing or playing back near the end of a section of a Device Recording

[Device Recording] Clock inconsistency following playback of device recordings across sections

[Device Recording] Recordings not restored to recording box after moving them across boundaries and selecting them by right-clicking on the timeline

[Device Recording] Right-clicking a device recording does not also select it

[Device Recording] Ensure only active recorders are displayed and updated

[Device Recording] Undoing device recording moves will cause the device recordings group UI to span the entire timeline

[Feed Visualiser] Changing Split Mode from Quad to Mirror gives a notification

[Networking] Changing surface type on a removed resource in a Network session gives a notification

[OmniCal Camera] Excessive console information from OmniCal cameras

[OmniCal Camera] Missing triangles after mesh deforming certain meshes in OmniCal

[OmniCal Camera] Clicking Setup capture may result in an Access Violation

[Projector Calibration] Reference point placement not always correct if the cursor is slightly off the mesh being calibrated to

[Projector Calibration] Manage Reference points at surface extremes in particular models not handled well

[Projector Studies] Projector studies don't print lens (throw ratio) on individual projector pages

[Projector Studies] Typo in projector studies, 'Lens Shift Horiztonal'

[Projector Studies] Projector studies do not fill the whole table page before flowing onto a second page

Current known issues

VR

- VR entails on additional render overhead

- This may result in a poor performance

 

Upgrading 32-bit to 64-bit Sockpuppet shows

- There may be issues upgrading Sockpupper projects from 32-bit to 64-bit in 14.4.x builds. If your project falls into this category, please contact support@disguise.one who can arrange a project upgrade for you.

 

Permissions error after installing

- On a small number of machines, a python-based permissions error will prevent software from starting.

- This issue can be solved by restarting Windows

 

Potential UI performance regression with long and busy timelines

- With either long or busy timelines containing e.g. a plethora of notes/cues, the UI may suffer a degradation in performance

- Minimising the timeline negates this

 

Slideshows transition time

- The transition time between slides in slideshows is currently broken

- The fix for this makes fundamental changes to timeline operations, so will take a while to work its way into future releases

 

A more comprehensive and detailed changelog will be issued for r15 in the coming days.

Please contact support@disguise.one for feedback and issues.

r15: New features, improvements and fixes
New features

[d3Manager] New mechanism for processing Options.ini and Machine.ini files

[Display Management] Add ability to independently manage GUI EDID emulation

Improvements 

[Modules] Improved handling of Web module for smoother animations

[Video Output] Improving usability and safety of Apply Feed Settings

[Visualiser] Add diffuse map to screens

[Keyframe Editor] Highlight keyframe that is being or will be edited

[d3Manager] Prompt users if old firmware or OS image is detected

[Modules] Increase number of custom parameters on the Web Module

Fixes 

[Audio] Removing Audio LineOut from Sockpuppet produces errors and may cause playback to fail

[Device Recording] Unable to open media - still copying? appears when trying to immediately play back a freshly created recording

[Feed Outputs] Referencing another projector on feed warps turns output black

[Feed Outputs] Hold, Fade Up & Fade Down commands do not pass over on editors when going between 'Independent' and 'Lock to Master'

[Feed Visualiser] solo GUI head is the right-most head in the feedview

[Feed Visualiser] Editors moving feed rectangles cause feed rectangles to jump about

[Live Update] Joining an Editor while in 'Hold' Output mode changes to Fade Up

[MIDI] Edge case of an infinite loop in MTCModule after first missed send window

[MIDI] Inconsistency in MidiNote output

[Modules] Trimming Module in 'Locked' places the first frame to the start of a VaraibleVideo layer

[Modules] TimecodeReadout exception if more than one video layer is present

[Monitors] Exception when deleting processes from the list in Monitor Manager

[Networking] Network lag can prevent Editors from joining a session without failed to sync warning

[Projector Calibration] Improvements to auto-z-clipping with OmniCal

[Projector Calibration] Potential for Editors not clearing reference points from the visualiser when closing projector configs

[Sockpuppet] Returning to a timecode chasing state from a LoopInframe state will offset timecode chase

[Startup] d3 quit takes noticeably longer

[Transport Controls] Having a Cue tag one frame after a Timecode Tag causes Timecode to fail

[Video Output] Specifying a bad clip rectangle causes a DirectX exception

[Video Output] Notify the user on detection of passive DP dongles

Current known issues

VR

- VR entails on additional render overhead

- This may result in a poor performance

 

Upgrading 32-bit to 64-bit Sockpuppet shows

- There may be issues upgrading Sockpupper projects from 32-bit to 64-bit in 14.4.x builds. If your project falls into this category, please contact support@disguise.one who can arrange a project upgrade for you.

 

Permissions error after installing

- On a small number of machines, a python-based permissions error will prevent software from starting.

- This issue can be solved by restarting Windows

 

Potential UI performance regression with long and busy timelines

- With either long or busy timelines containing e.g. a plethora of notes/cues, the UI may suffer a degradation in performance

- Minimising the timeline negates this

 

Slideshows transition time

- The transition time between slides in slideshows is currently broken

- The fix for this makes fundamental changes to timeline operations, so will take a while to work its way into future releases

 

N.B. these are merely a sample of the new features, improvements and fixes that have been implemented. A full changelog will be made available in the coming days.

Please contact support@disguise.one for feedback and issues.